Nanoskin AutoScrub Wash Mitt Fine Grade

A fast, easy way to decontaminate paint. 

The NANOSKIN AUTOSCRUB WASH MITT is a microfibre mitt with one side finished in a high-tech rubber polymer coating that removes above-surface contaminants as you wash your car.

Also known as a CLAY MITT, the Nanoskin Autoscrub Wash Mitt effectively replaces the traditional clay bar as your go-to means for removing bonded contaminants. The Autoscrub Wash Mitt is perfect for detailers who seek an easier means of removing contaminants before polishing or waxing.

Paint decontamination is a key step in the detailing process. If the surface isn’t clean from contaminants, your polishes won’t be as effective and your wax, sealant or coating won’t fully bond to the surface. Until recently, the only way to cleanse paint of surface contaminants was with detailing clay. Now, Nanoskin has taken paint decontamination to a new level.

The FINE GRADE Nanoskin Autoscrub Wash Mitt is ideal for vehicles that are well taken care of or have been clayed in the past.

Directions: Mix 30ml Nanoskin Bubble Bath Wash & Shine Shampoo per 4 litres of water. Rinse surface with water to flush away loose dirt. Wash and rinse in sections using Autoscrub Wash Mitt using light pressure. Rinse with clean water and dry vehicle using a Waffle Weave Drying Towel.

Note: This is the FINE GRADE version of the Autoscrub Mitt. It is designed for vehicles with light to moderate contaminants. To achieve flawless paint when you’re finished using the Autoscrub Mitt, we recommend following up with a fine polish.

Size of Mitt: 150mm x 220mm