The CCS Euro Foam Polish Applicators allow you to match polishes to the appropriate foam variety, just as you’d do if you were applying the products with a polisher. Now you can get better results by hand because the applicator is enhancing the performance of the product. Work smarter with CCS Euro Foam Hand Polish Applicators!

These foam applicators utilize CCS Technology™, just like machine buffing pads. CCS pockets, as you can see in the photo, cover one side of each applicator. The pockets create spaces for excess polish to accumulate – without soaking into the foam – until it is needed on the work surface. Then the polish is drawn up through the centre dimples of each CCS pocket and onto the applicator’s work surface. This design saves product because the CCS pockets significantly reduce product absorption.

The Euro Foam Hand Polish Applicators are available in three grades

Orange Light Cutting Applicator – The orange foam is the most popular type of foam used in making buffing pads. It has a texture like memory foam but denser. It can be used to remove light to moderate swirls with little or no loss of surface gloss. Use a light swirl remover, such as XMT Ultra Fine Swirl Remover 1 or XMT Fine Swirl Remover 2. In most cases, you can go straight to wax application with the red applicator. Use the orange pad for spot correction or on the entire vehicle.

White Polishing Applicator – For general polishing and pre-wax cleaning, we recommend the white polishing foam. This is one of the most versatile foam compositions. Use it to apply finishing polishes, pre-wax cleaners, and all in one products, for example Pinnacle Paintwork Cleansing Lotion or Klasse All In One. The foam is less dense than the orange pad. It has just enough density to help clean and polish the paint, but it will not produce haze.

Red Ultra Soft Finishing Applicator – The red foam is designed specifically for the application of waxes, sealants, and glazes. It has no cut or cleaning ability. The soft foam will not leave any haze and it is gentle on all automotive surfaces. Use the red foam applicator with any last step product to product a smooth, flawless finish.

Each Euro Foam Hand Polish Applicator is 150 x 95 x 32mm. The oval shape is easy to grip and the applicators have enough surface area to cover a lot of paint quickly.

Wash applicators with Cobra Quik Clenz Pad Cleaner after every use. Rinse and air dry. The concentrated cleaner will release products from the foam’s cells and eliminate residue.

If you prefer to detail by hand, now you can match your applicator to the product, just as if you were machine detailing. CCS Euro Foam Hand Polish Applicators make hand detailing more efficient and more effective than ever before!

150 x 95 x 32mm.