The CCS Smart Pads Dual Action 6.5 inch Professional Foam Pads are larger versions of the 4” and  5.5 inch DA foam pads. These buffing pads pack the same CCS technology and performance.

Lake Country’s CCS Dual Action 6.5 inch Smart Pads Foam Pads are flat full contact buffing pads that work with your dual action orbital polisher to correct paint more easily than ever before. The CCS Smart Pad’s user-friendly features provide better control, less product waste, and a more successful detail.

CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country’s innovative pad design that saves product by controlling product release onto the work surface.

CCS Smart Pads™ are available in 4”, 5.5 inch, and 6.5”.

Yellow Low Profile Cutting 6.5 inch Foam Pad - Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange or white pad and a fine polish to refine the paint until it is smooth.

Orange Low Profile Light Cutting 6.5 inch Foam Pad - Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It’s an all around pad that will work on most light to moderate imperfections.

White Low Profile Polishing 6.5 inch Foam Pad - Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so it is perfect for pre-wax cleaners.

Green Low Profile Polishing/ Finishing 6.5 inch Foam Pad - Use this foam to apply one-step cleaner waxes. It is a balance of polishing and finishing that is perfect for all-in-one product application

Black Low Profile Finishing 6.5 inch Foam Pad - Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. It has no cut and will apply thin, even coats of waxes, sealants, and glazes.

Blue Low Profile Finessing 6.5 inch Foam Pad – Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.

Red Low Profile Ultrasoft Wax/Sealant 6.5 inch Foam Pad - This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability.

Lambswool Levelling Pad - The lambswool pad is best used as a cushion underneath a bonnet on your polisher. The wool pad serves as a barrier between the bonnet and the backing plate. Unlike foam pads that can be crushed under a bonnet, the lambswool pad retains its shape and can be used for light compounding if you desire.

To clean all foam pads: Mix a scoop of Cobra Quik Clenz Pad Cleaner in 3-4 gallons of water before you begin detailing. When you're finished with each pad, toss it in the mixture to soak. Mild agitation will release any polish residue. Rinse the pads and lay them flat to dry. Lay the pads foam side down. If foam pads are left to dry with the hook & loop facing down, water will settle where the hook & loop is glued to the foam and it may affect the glue. For the best results, lay pads foam side down so water drains down and out of the foam.