Nanoskin Autoscrub Fine Grade Foam Pad - 6 inch

Nanoskin Autoscrub - A fast alternative to the clay bar

The Nanoskin Autoscrub System is a fast, effective way to remove surface contaminants from your cars paint. The Nanoskin Autoscrub System uses advanced rubber polymer technology to safely remove surface paint contaminants, just like a clay bar does. Nanoskin has pioneered the machine application of this technology with the Autoscrub System.

Traditionally, detailers and car care enthusiasts agree that claying is a tedious step in cleaning you car. It is messy, time consuming, and you don’t always achieve the smooth finish that you desire.  The Nanoskin Autoscrub System replaces detailing clay - it effortlessly removes paint contaminants leaving you with a smooth finish that’s ready for polishing.

By using the power of your dual action (DA) polisher, the Nanoskin Autoscrub System removes all types of paint contaminants including rail dust, paint over spray, industrial fall out, bugs and even tar. What’s more, it can even be used on glass, chrome, and exterior trim.

Simply use an approved lubricant, like Nanoskin Glide or Nanoskin Shock. Spray a liberal amount on the surface and turn the polisher on with the Autoscrub System attached. Make a few passes over each area and then inspect your work. If you accidentally drop the Autoscrub System on the ground\, simply rinse it off with water.

Directions: Spray a liberal amount of lubricant over the area that you're going to work with the Autoscrub system. We recommend that you only use an approved lubricant. Nanoskin Glide and Nanoskin Shock both work well with Autoscrub.

Set the polisher on a low speed setting and move the polisher back and forth and then side to side. Do NOT apply any pressure to the polisher. Inspect the paint often using your hand placed in a plastic baggy. When the paint feels smooth\, wipe off the lubricant and move on to the next section.

Please note that this is the FINE GRADE version of the Autoscrub System. It is designed for vehicles with light to moderate contaminants. To achieve flawless paint when you’re finished using the Autoscrub System, we recommend following up with a fine polish.