Optimum Gloss-Coat is a high-tech polymer system that forms an extra layer of clear coat over all external surfaces Formulated by award-winning Dr. David Ghodoussi, Optimum Gloss-Coat is designed to provide resistance to etching caused by harsh detergents, and swirl marks that are often inflicted during the wash process.
Optimum Gloss-Coat can be applied to all exterior surfaces. It is not recommended for glass since improper application can affect visibility. For other exterior surfaces, Optimum Gloss-Coat is a highly effective, transparent protective coating.
Optimum Gloss-Coat can be applied to:
• Painted surfaces
• Plastic trim
• Aluminium & chrome surfaces
Optimum Gloss-Coat is an additional barrier between the elements and your vehicle's paint. The paint will retain its colour and contaminants will be blocked out to keep the paint smooth and clean.
Because Optimum Gloss-Coat is semi-permanent\, the paint finish has to be properly prepared before applying it.
1. Polish paint.
2. Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones.
3. Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel.
4. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction.
5. Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear.
6. Use foam applicator or paint safe microfibre to even out any areas where you see streaks. This step is key, as any spots not levelled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-levelling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.